Sequencing orders of multiple sized stock sheets
| dc.contributor.author | Rao, Jinsong | en_US |
| dc.date.accessioned | 2007-05-15T15:29:51Z | |
| dc.date.available | 2007-05-15T15:29:51Z | |
| dc.date.issued | 1997-05-01T00:00:00Z | en_US |
| dc.degree.discipline | Mechanical and Manufacturing Engineering | en_US |
| dc.degree.level | Master of Science (M.Sc.) | en_US |
| dc.description.abstract | This thesis studies the problem of two-dimensional multiple sized stock sheets cutting. It is concerned primarily with the problem of how to sequence orders of multiple sized stock sheets in order to minimize the total trim-loss for a given bill of material. Existing optimal and heuristic pro edures do not balance well the conflicting requirements of efficient stock sheet utilization and minimal computational effort. A critical study of these procedures, however, leads to a new procedure which is based on a single stock sheet layout approach. The procedure is designed for an IBM compatible microcomputer. It is compared with three of the better existing procedures using test data created by a random problem generator. Results show that the new procedure performs relatively well. | en_US |
| dc.format.extent | 7726761 bytes | |
| dc.format.extent | 184 bytes | |
| dc.format.mimetype | application/pdf | |
| dc.format.mimetype | text/plain | |
| dc.identifier.uri | http://hdl.handle.net/1993/1132 | |
| dc.language.iso | eng | en_US |
| dc.rights | open access | en_US |
| dc.title | Sequencing orders of multiple sized stock sheets | en_US |
| dc.type | master thesis | en_US |