Stability of controlled mechanical system with parametric uncertainties in a realistic friction model

Simple item page
dc.contributor.authorSun, Yun-Hsiang
dc.contributor.examiningcommitteeAnnakkage, Udaya (Electrical and Computer Engineering) Peng, Quingjin (Mechanical Engineering) Xie, Wen-Fang (Concordia University)en_US
dc.contributor.supervisorWu, Christine Qiong (Mechanical Engineering) Sepehri, Nariman (Mechanical Engineering)en_US
dc.date.accessioned2016-09-02T19:14:03Z
dc.date.available2016-09-02T19:14:03Z
dc.date.issued2016en_US
dc.date.issued2016en_US
dc.date.issued2015en_US
dc.date.issued2015en_US
dc.degree.disciplineMechanical Engineeringen_US
dc.degree.levelDoctor of Philosophy (Ph.D.)en_US
dc.description.abstractFriction compensation is challenging but imperative for control engineers. For high-performance engineering systems, a friction-model-based controller is typically required to accommodate the nonlinearities arisen from the friction model employed. It is well known that the parameters of the friction model used in the friction compensation are nearly impossible to be accurately identified. Therefore, the objective of this research is to study the effect of these parametric uncertainties on the stability of a set-point position control system. With the above goal in mind, a variety of aspects are investigated in this work. Firstly, several common friction features and friction models are surveyed to provide background knowledge which helps select the friction model with the highest accuracy for our study. Secondly, an experimental setup is proposed and fabricated to validate the levels of accuracy given by the candidate friction models. The comparisons between the numerical and experimental results confirm that the LuGre friction model is the best approximation of the observed friction behaviours among all models selected. Moreover, a series of profound discussions addressing the relation between the candidate models’ structures and their numerical friction feature predictions are provided and followed by a summary table that recapitulates the properties of the candidate friction models. Last but not least, the state space models of the proposed setup formulated by the improved version of the LuGre model and the two controllers of interest, namely input-output linearization controller and nominal characteristic trajectory following (NCTF) controller, are derived for the stability analysis under the parametric uncertainties. Two parameters in the friction model used, σ_0 and σ_1, are perturbed for the stability analysis in which the results applying the concept of Lyapunov exponents (LEs) clearly illustrate the significant effect of the varying σ_0 and σ_1 values on the system stability. The effect of parametric uncertainties can depend quite significantly on the incorporated controller, and the stability results obtained here are applicable to the design and analysis of other systems that are inherently similar to our setup. The stability analysis conducted is this work is recommended for other control systems to avoid unwanted qualitative behaviours under parametric perturbations.en_US
dc.description.noteOctober 2016en_US
dc.identifier.citationSun, Yun-Hsiang, et al. "Comparison of Four Friction Models: Feature Prediction." Journal of Computational and Nonlinear Dynamics 11.3 (2016): 031009.en_US
dc.identifier.citationSun, Yun-Hsiang, et al. "A comprehensive experimental setup for identification of friction model parameters." Mechanism and Machine Theory 100 (2016): 338-357.en_US
dc.identifier.citationSun, Yun-Hsiang, Tao Chen, and Cyrus Shafai. "Parameter Identification of LuGre Friction Model: Experimental Set-up Design and Measurement." ASME 2015 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2015.en_US
dc.identifier.citationSun, Yun-Hsiang, and Christine Qiong Wu. "Stability Analysis of Input-Output Linearization Control With LuGre Friction Model Using Lyapunov Exponents." ASME 2015 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2015.en_US
dc.identifier.urihttp://hdl.handle.net/1993/31633
dc.language.isoengen_US
dc.publisherASMEen_US
dc.publisherMechanical and Machine Theoryen_US
dc.publisherASMEen_US
dc.publisherASMEen_US
dc.rightsopen accessen_US
dc.subjectFriction model comparisonen_US
dc.subjectFriction experimental setup designen_US
dc.subjectPerturbation stabilityen_US
dc.subjectLuGre friction modelen_US
dc.subjectControlled mechanical systemen_US
dc.subjectLyapunov exponentsen_US
dc.titleStability of controlled mechanical system with parametric uncertainties in a realistic friction modelen_US
dc.typedoctoral thesisen_US
Files
Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
Sun_Yunhsiang.pdf
Size:
13.05 MB
Format:
Adobe Portable Document Format
Description:
Ph. D. thesis
Download
License bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
license.txt
Size:
2.2 KB
Format:
Item-specific license agreed to upon submission
Description:
Download
Collections
FGS - Electronic Theses and Practica