Corrosion and Fretting Corrosion Studies of medical grade CoCrMo implant material in a more clinically relevant simulated body environment.
| dc.contributor.author | Ocran, Emmanuel Kofi | |
| dc.contributor.examiningcommittee | Morrison, Jason (Biosystems Engineering) Brandt, Jan-M (Mechanical and Manufacturing Engineering) | en_US |
| dc.contributor.supervisor | Ojo, Olanrewaju (Mechanical and Manufacturing Engineering) Wyss, Urs (Mechanical and Manufacturing Engineering) | en_US |
| dc.date.accessioned | 2014-05-27T15:45:23Z | |
| dc.date.available | 2014-05-27T15:45:23Z | |
| dc.date.issued | 2014-05-27 | |
| dc.degree.discipline | Mechanical and Manufacturing Engineering | en_US |
| dc.degree.level | Master of Science (M.Sc.) | en_US |
| dc.description.abstract | In modular hip implants, micro-motion, which leads to fretting corrosion at the head/neck and neck/stem interfaces, has been identified as a major cause of early revision in hip implants, particularly those with heads larger than 32mm. It has been found that the type of fluid used to simulate the fretting corrosion of biomedical materials is crucial for the reliability of laboratory tests. Therefore, to properly understand and effectively design against fretting corrosion damage in modular hips, there is the need to replicate the human body environment as closely as possible during in-vitro testing and validation. In this work, corrosion behavior of CoCrMo in 0.14 M NaCl, phosphate buffered saline (PBS) and clinically relevant simulated body fluid (sbf) is carried out. Also, fretting corrosion studies of the CoCrMo alloy in a clinically relevant novel simulated body fluid (sbf) environment is studied. The presence of phosphate ions in PBS accounted for the higher corrosion rate when compared with 0.14 M NaCl and sbf environment. Despite the low and comparable corrosion rates in 0.14 M NaCl and sbf, the nature of the protective passive film formed in sbf shows the suitability of the novel sbf for future corrosion and fretting corrosion analysis. Finally, the influence of micro-motion at the modular head/neck and neck/stem interfaces on the concentration of metallic ions that goes into the synovial fluid and surrounding tissues is reported. | en_US |
| dc.description.note | October 2014 | en_US |
| dc.identifier.uri | http://hdl.handle.net/1993/23602 | |
| dc.language.iso | eng | en_US |
| dc.rights | open access | en_US |
| dc.subject | Corrosion | en_US |
| dc.subject | Fretting corrosion | en_US |
| dc.subject | simulated body fluid | en_US |
| dc.subject | CoCrMo | en_US |
| dc.subject | implants | en_US |
| dc.title | Corrosion and Fretting Corrosion Studies of medical grade CoCrMo implant material in a more clinically relevant simulated body environment. | en_US |
| dc.type | master thesis | en_US |