Design project final report
Loading...
Date
2012-02-24
Authors
De Castro, Jericho
Zhang, Pei
Wong, Peter
O'Connor, Brian
Journal Title
Journal ISSN
Volume Title
Publisher
Abstract
The objective of this project is to design a composite modular floor and wall panel system for
Composite Innovation Center (CIC) to be implemented in a temporary disaster relief structure. CIC
completed the design and prototyping of an open modular composite gazebo, consisting of a modular roof
panel and supporting timber frame, and decided to expand the gazebo‟s functionality by enclosing it to
serve as a temporary disaster relief structure in the tropical zone.
The completed design of the floor and wall systems consists of 9 uniquely designed components
used in conjunction with pins, bolts, nuts, and washers. The geometry of the components allows for
electrical routing and plumbing; and the ability to expand the structure by 4 ft. The intended joints make it
easy for the assembler to locate and secure the components together. In addition, the components were
designed to maximize the assembling efficiency.
While the design itself is not production ready, further stress analysis must be applied to finalize
geometry, joints, and materials. However, it is recommended that pultrusion be used for all shelter parts.
Core materials for floor and wall panels will depend on loading requirements and should attempt to utilize
green materials in the final design.
Description
Keywords
Composites Innovation Center, design, project, modular, gazebo, composite