Fault-tolerant control of hydraulically-powered actuators using fractional-order PID schemes
| dc.contributor.author | Maddahi, Ali | |
| dc.contributor.examiningcommittee | Balakrishnan, Subramaniam (Mechanical Engineering) Kinsner, Witold (Electrical and Computer Engineering) Zhao, Qing (Electrical and Computer Engineering, University of Alberta) | en_US |
| dc.contributor.supervisor | Sepehri, Nariman (Mechanical Engineering) | en_US |
| dc.date.accessioned | 2019-03-06T21:47:42Z | |
| dc.date.available | 2019-03-06T21:47:42Z | |
| dc.date.issued | 2019-02-27 | en_US |
| dc.date.submitted | 2019-02-28T03:14:52Z | en |
| dc.degree.discipline | Mechanical Engineering | en_US |
| dc.degree.level | Doctor of Philosophy (Ph.D.) | en_US |
| dc.description.abstract | Hydraulic actuators are used extensively in various equipment including aircraft, robots and heavy-duty machinery. One of the common problems in hydraulic systems is occurrence of faults such as the actuator internal leakage. Some faults need to be detected properly to prevent actuator malfunctioning. For example, the internal leakage deteriorates the system performance as it causes the fluid to move between cylinder chambers. Model-based fault detection techniques require a model of the hydraulic actuator and faults or an estimation of system parameters. In practice, there is no accurate model to describe some faults. Application of data-driven fault detection techniques is more desirable. One of the main challenges, due to the faults, in hydraulic actuation systems is the controller design. If a controller is not able to compensate for fault effects, it may lead to considerable losses. Therefore, there is a need for designing fault-tolerant controllers (FTCs). Data-driven techniques of controller design are good solutions to overcome challenges associated with obtaining models or estimating system and fault parameters. In this thesis, the applications of data-driven techniques of the fault detection and controller design to the hydraulic actuators are investigated and exemplified with detection of the internal leakage fault and design of a control system tolerant to the leakage. First, a set of multiscale measures is quantified in various healthy and faulty operating modes and a comparison is carried out, between the measures, to identify the most reliable indicator(s) in detecting various levels of the leakage. Comparison results indicate that the wavelet transform is the best technique, amongst the employed multiscale measures, for the internal leakage detection. Next, a fractional-order PID (FOPID) position controller is designed using experimental data. Efficacy of the designed controller in tracking various reference inputs, in presence of different system uncertainties, is examined through experiments. Finally, a methodology is developed for designing an FOPID-based FTC that does not require a prior knowledge about the model and parameters of the system and fault or emulation of the fault in experimental setup. The methodology is based on introduction of a set of synthetic errors to the hydraulic actuator. Experimental results prove that the methodology works well for a hydraulic actuator experiencing the internal leakage. | en_US |
| dc.description.note | May 2019 | en_US |
| dc.identifier.uri | http://hdl.handle.net/1993/33781 | |
| dc.language.iso | eng | en_US |
| dc.rights | open access | en_US |
| dc.subject | Fault-tolerant control | en_US |
| dc.subject | Robust control | en_US |
| dc.subject | Fractional-order PID controller | en_US |
| dc.subject | Multiscale analysis | en_US |
| dc.subject | Iterative feedback tuning | en_US |
| dc.subject | Hydraulic actuators | en_US |
| dc.subject | Fault detection | en_US |
| dc.subject | Wavelet transform | en_US |
| dc.subject | Fractal dimensions | en_US |
| dc.subject | Internal leakage detection | en_US |
| dc.title | Fault-tolerant control of hydraulically-powered actuators using fractional-order PID schemes | en_US |
| dc.type | doctoral thesis | en_US |