Ergonomic evaluation of visual guidance aids for agricultural machines
dc.contributor.author | Tang, Pingjun | en_US |
dc.date.accessioned | 2007-05-18T19:57:50Z | |
dc.date.available | 2007-05-18T19:57:50Z | |
dc.date.issued | 2000-08-01T00:00:00Z | en_US |
dc.degree.discipline | Biosystems Engineering | en_US |
dc.degree.level | Master of Science (M.Sc.) | en_US |
dc.description.abstract | A variety of guidance aids for agricultural machines are available on the market. The visual guidance aid is considered to be the most useful tool for further development. Currently, the main concerns with using the visual guidance aid are the placement of the camera and the driver mental workload caused by the introduction of another monitor into the tractor cab. The objectives for this thesis, therefore, were to determine the optimum placement of a video camera to minimize lateral error and to determine a relationship between lateral error and driver mental workload. To achieve these goals, an experiment was conducted in the field with a visual guidance aid. Two measurements, lateral error and driver subjective scores, were recorded and later analyzed. Based on results of both lateral error and subjective scores, it was concluded that, to achieve a lateral error less than 200 mm, a guidance camera should be placed 1.5 m above the ground and tilted downward at 30. Furthermore, a camera with a 20 lateral field of view is more appropriate than a camera with a 39 lateral field of view. To explain the relationship between driver mental workload and lateral error, two concepts, lateral ratio and image velocity were defined based on geometric relationships. Two hypotheses were proposed based on the experimental results. First, it was hypothesized that the driver mental workload would increase as image velocity increased. Second, it was hypothesized that the magnitude of lateral errors would increase as the lateral ratio increased. Because the image velocity is inversely proportional to the lateral ratio, it may be necessary to find a compromise between driver mental workload and the lateral error. In other words, to achieve a reasonable lateral error, a driver must tolerate a certain workload. | en_US |
dc.format.extent | 6156267 bytes | |
dc.format.extent | 184 bytes | |
dc.format.mimetype | application/pdf | |
dc.format.mimetype | text/plain | |
dc.identifier.uri | http://hdl.handle.net/1993/1765 | |
dc.language.iso | eng | en_US |
dc.rights | open access | en_US |
dc.title | Ergonomic evaluation of visual guidance aids for agricultural machines | en_US |
dc.type | master thesis | en_US |