Show simple item record Maqsood, Omar Nguyen, Bao Tiefenbach, Marc Dahl, John 2012-02-17T17:51:28Z 2012-02-17T17:51:28Z 2012-02-17
dc.description.abstract Team Supernova has been commissioned by Bristol Aerospace Limited to design a fixture for a jet engine bypass duct as part of the University of Manitoba Engineering Design class. Bristol Aerospace manufactures a bypass duct for the Airbus A380 turbofan engine. In the current manufacturing process of the duct workers are at risk of strain injuries from manual manipulation of the part. This report proposes a fixture for the jet engine duct that will eliminate worker strain. After conducting research and analysis, six conceptual fixture designs were generated. Further screening led to the conclusion that the suspended arm fixture would be the most feasible for this application. During the design phase of the suspended arm fixture another fixture that functions similar to the suspended arm was discovered. This fixture, available from the Anver Corporation, is the fixture that the team chose to pursue. The fixture will be supplied by Acculift‐Airmax, the Winnipeg distributor for Anver. The fixture is a custom, electric powered, vacuum lifter with side grippers capable of 360 degree manual rotation. The fixture will make use of a currently existing electric hoist in the manufacturing plant at Bristol Aerospace. The electric hoist will provide lifting, lowering, and translational motion of the duct, and the fixture would provide the rotational motion. The Anver fixture has a quoted cost of $15,995. A stand for the fixture, designed by the team, has a quoted cost of $448, bringing the total cost of the fixture system to $16,443. The Anver fixture meets all of the customer’s needs and target specifications. Supernova recommends that Bristol Aerospace purchase the Anver fixture and implement its use in the manufacturing process of the jet engine duct in order to eliminate worker strain. en_US
dc.rights info:eu-repo/semantics/openAccess
dc.subject jet en_US
dc.subject engine en_US
dc.subject bypass en_US
dc.subject duct en_US
dc.title Fixture for jet engine bypass duct : final design report en_US
dc.type info:eu-repo/semantics/bachelorThesis Mechanical and Manufacturing Engineering en_US Bachelor of Science (B.Sc.) en_US December 2010

Files in this item

This item appears in the following Collection(s)

Show simple item record

View Statistics