Aerodynamic devices are utilized in higher levels of motorsport such as Formula-1 to increase the traction of the tires by generating down force. This increase in traction increases the performance envelope of the race ...

The University of Manitoba SAE (UMSAE) Baja team is a school group that designs, builds and races an off-road vehicle every year. The team has requested a re-design of their powertrain system, as they have had problems ...

The purpose of this report is to detail the design and analysis of a coin roll check weighing system for the Royal Canadian Mint. The intent of this system is to check the number of coins per wrapped roll, reject if ...

Bristol Aerospace Ltd. manufactures a stage of the Black Brant sounding rocket known as the Nihka rocket motor. After casting propellant into the motor casing, a two stage trim process must occur whereby first the excess ...

Micro Tool and Machine Ltd. (MTM) required our team to conceptualize and design a machine assembly process capable of moving and orientating transformer radiator cooling panels between two machine operations and in so doing ...

Cormer Group Industries has requested C.A.D.D. consulting to develop or source a suitable welding cell in order to obtain future contracts. Since automated welding is a new process for CGI, it has been stated that the ...

This report outlines a process designed for compacting soil into automobile tires. The current state of this process consists of manually filling and packing the soil with a sledge hammer. A mechanized process is needed ...

This report outlines the redesign of StandardAero Winnipeg’s existing turbine test carts in order to accommodate two different engines. The primary goal of the redesign was to improve the testing time required for each ...

The objective of this project is to design a composite modular floor and wall panel system for Composite Innovation Center (CIC) to be implemented in a temporary disaster relief structure. CIC completed the design and ...

The purpose of this project was to design a closed loop cooling system for Buhler Versatile’s new water break dynamometer. The following report outlines the steps taken to develop a closed loop cooling system that will ...