Powerful diode-pumped ultrafast solid-state laser oscillators based on bulk Yb:KGd(WO4)2 crystals

Thumbnail Image
2013-08, 2014-10, 2013-12, 2014-12, 2010-06
Zhao, Haitao
Journal Title
Journal ISSN
Volume Title
IOP Publishing
Optical Society of America
Optical Society of America
Optical Society of America
SP MAIK Nauka/Interperiodica
Yb-ion doped gain media have become the material of choice for reliable generation of ultrashort pulses at wavelength around 1 μm. At present, however, operation at high average power (>1 W) with sub-100 fs pulses still remains challenging. The efforts of developing an Yb-ion oscillator towards this goal, therefore, are the main focus of this thesis. In this work, the Yb:KGd(WO4)2 (Yb:KGW) crystals were chosen to serve as the gain media. To achieve high power operation, two fundamental issues have been carefully considered: 1) a new pumping scheme was proposed to alleviate the thermal issues in the Yb:KGW crystals; 2) a new method was introduced to characterize intracavity losses in the broadband Yb-ion oscillators. As a side effect observed during the optimization of the CW operation, simultaneous two-wavelength emission was also discussed. With the knowledge and experimental understanding of the fundamental issues in laser oscillators operated in the continuous-wave regime, the next step of this work demonstrated their operation in a pulsed regime. The dual action of the Kerr-lens and saturable absorber (KLAS) mode locking was proposed in this work and resulted in greatly enhanced laser performance. The laser delivered pulses with 67 fs duration at a repetition rate of 77 MHz. The average output power reached 3 W, which, to the best of our knowledge, is the highest average output power produced to date from the Yb-ion based bulk lasers with such a short pulse duration. The scalability of pulse energy and peak power was also demonstrated by reducing the repetition rate to either 36 MHz or 18 MHz. The cavity with the latter repetition rate produced 85 fs pulses with the pulse energy up to 83 nJ, which corresponds to a peak power as high as 1 MW. As required by many biomedical applications, the wavelength of the generated pulses (~1 μm) can be tuned in the near-infrared region by coupling them into an optical parametric oscillator (OPO). The feasibility of this approach was demonstrated in the last part of this thesis, through a thorough theoretical analysis of two OPO materials suitable for excitation at 1.04 μm.
Ultrafast lasers, Solid-state lasers, Ytterbium lasers, diode-pumped lasers, Mode-locked lasers
H. Zhao and A. Major, “A continuous wave Yb:KGW laser with polarization-independent pump absorption,” Laser Physics 23, 095001 (2013).
H. Zhao and A. Major, “Dynamic characterization of intracavity losses in broadband quasi-three-level lasers,” Optics Express 22, 26651-26658 (2014).
H. Zhao and A. Major, “Powerful 67 fs Kerr-lens mode-locked prismless Yb:KGW oscillator,” Optics Express 21, 31846-31851 (2013).
H. Zhao and A. Major, “Megawatt peak power level sub-100 fs Yb:KGW oscillators,” Optics Express Optics Express 22, 30425-30431 (2014).
H. Zhao, I. T. Lima Jr., and A. Major, “Near-infrared properties of periodically poled KTiOPO4 and stoichiometric MgO-doped LiTaO3 crystals for high power optical parametric oscillation with femtosecond pulses,” Laser Physics 20, 1404-1409 (2010).