Show simple item record

dc.contributor.supervisor Filizadeh, Shaahin (Electrical and Computer Engineering) en_US
dc.contributor.author Patabandi Maddumage, Chathura Jeevantha
dc.date.accessioned 2011-08-24T19:28:11Z
dc.date.available 2011-08-24T19:28:11Z
dc.date.issued 2011-08-24
dc.identifier.uri http://hdl.handle.net/1993/4770
dc.description.abstract With the increased complexity of modern power systems, it may be required more than one platform to do an intended study efficiently and accurately. This research was carried out to investigate the use of co-simulation in an application of power system. A back-to-back Voltage Source Converter (VSC) transmission system was modeled in PSCAD/EMTDC which is an Electro-Magnetic Type (EMT) software. Results were analyzed for some operating points of the system. Then the control system of the above system was modelled in MATLAB/SIMULINK while the rest of the system was modeled in PSCAD/EMTDC. Both of these systems were interfaced to obtain the complete system and results were analyzed under same operating points as the original PSCAD case. en_US
dc.subject VSC system en_US
dc.subject Co-Simulation en_US
dc.subject Interfacing en_US
dc.subject Optimization en_US
dc.subject Transient simulation en_US
dc.title Co-Simulation of Back-to-Back VSC Transmission System en_US
dc.degree.discipline Electrical and Computer Engineering en_US
dc.contributor.examiningcommittee Annakkage, Udaya (Electrical and Computer Engineering) Elmekkawy, Tarek (Mechanical and Manufacturing Engineering) en_US
dc.degree.level Master of Science (M.Sc.) en_US
dc.description.note October 2011 en_US


Files in this item

This item appears in the following Collection(s)

Show simple item record

View Statistics