Assessment of geothermal application for electricity production from the prairie evaporite formation of Williston Basin in South-West Manitoba

Loading...
Thumbnail Image
Date
2015-06-09, 2016-10
Authors
Firoozy, Niloofar
Journal Title
Journal ISSN
Volume Title
Publisher
13th International UFZ-Deltares Conference on Sustainable Use and Management of Soil, Sediment and Water Resources
GeoVancouver 2016
Abstract
In this thesis, the potential of enhanced geothermal system to provide adequate energy to a 10 MW electricity power plant from Prairie Evaporite Formation of Williston Basin was investigated. This formation partly consists of halite with low thermal resistance and high thermal conductivity, which translates into a lower drilling length to reach the desired temperature, comparing to other rock types. To this end, two numerical models with experimental data in south-west Manitoba (i.e. Tilston) and south-east Saskatchewan (i.e. Generic) were designed. The thermal reservoirs were located at 1.5 km (Tilston site) and 3 km (Generic site) with approximate thicknesses of 118 m. Considering an injection brine of 6% NaCl at 15°C, the final derived temperature at wellhead of the production wells were 43°C and 105°C respectively. Finally, the Generic site was concluded as a suitable candidate for electricity production by providing higher surfaced fluid temperature than the minimum of 80°C.
Description
Keywords
Geothermal application, Electricity production, Williston Basin, Prairie Evaporite, Halite, Enhanced Geothermal System (EGS)
Citation
Firoozy, N. and Holländer, H.M. (2015), Potential of geothermal energy from deep saline formations of the Williston Basin. 13th International UFZ-Deltares conference on sustainable use and management of soil, sediment and water resources, Copenhagen, Denmark, June 2015.
Holländer, H.M. and Firoozy, N. (2016): Simulation of heat and fluid transfer of an EGS well system for electricity production in the Williston Basin. GeoVancouver, Vancouver, BC, 02.10.-05.10.2016, Canada, 2016.