Team Supernova has been commissioned by Bristol Aerospace Limited to design a fixture for a jet engine bypass duct as part of the University of Manitoba Engineering Design class. Bristol Aerospace manufactures a bypass ...

Aerodynamic devices are utilized in higher levels of motorsport such as Formula-1 to increase the traction of the tires by generating down force. This increase in traction increases the performance envelope of the race ...

This report presents designs for the lubrication circuit, scavenging prevention system and recommendations for shifting system upgrades to the 2012 University of Manitoba Formula Student Design Team. The scavenging ...

The University of Manitoba SAE (UMSAE) Baja team is a school group that designs, builds and races an off-road vehicle every year. The team has requested a re-design of their powertrain system, as they have had problems ...

Thirteen Engineering Co. (TEC) was tasked with developing a concept for an anti-scatter grid system that is compatible with mammography tomosynthesis machines, for CancerCare Manitoba (CCM). In the initial phases of the ...

The purpose of this report is to detail the design and analysis of a coin roll check weighing system for the Royal Canadian Mint. The intent of this system is to check the number of coins per wrapped roll, reject if ...

Bristol Aerospace Ltd. manufactures a stage of the Black Brant sounding rocket known as the Nihka rocket motor. After casting propellant into the motor casing, a two stage trim process must occur whereby first the excess ...

Micro Tool and Machine Ltd. (MTM) required our team to conceptualize and design a machine assembly process capable of moving and orientating transformer radiator cooling panels between two machine operations and in so doing ...

This report outlines the redesign of a Kerrison surgical instrument used by surgical staff at the Winnipeg Health Sciences Center (HSC). The primary goal of the redesign was to strengthen the current instruments while ...

This report outlines a load simulator design for MacDon Industries Ltd. for tractor performance testing. The load simulator is designed to receive hydraulic and mechanical loads induced by an external source and convert ...