Search
Now showing items 1-10 of 16
Design of a front aerodynamic package : final design report
(2012-06-11)
Aerodynamic devices are utilized in higher levels of motorsport such as Formula-1 to increase
the traction of the tires by generating down force. This increase in traction increases the performance
envelope of the race ...
Test cart design for Standard Aero : final design report
(2012-02-24)
This report outlines the redesign of StandardAero Winnipeg’s existing turbine test carts
in order to accommodate two different engines. The primary goal of the redesign was to
improve the testing time required for each ...
Rammed earth tire packing process design : final design report
(2012-02-24)
This report outlines a process designed for compacting soil into automobile tires. The current state of this
process consists of manually filling and packing the soil with a sledge hammer. A mechanized process is
needed ...
Design of sheet metal handling system at Bristol Aerospace Limited
(2012-02-17)
This report is about the improvement of Bristol’s sheet metal handling system by CKW design team to reduced scratches and dents in sheet metal. These scratches and dents result in waste material or high rework by the ...
New Flyer roof design : final report
(2012-02-24)
This report specifies a design that will resolve the leaking roof problem that New Flyer has been experiencing on their 40-foot transit bus model. The problem was found to result from large deformation of the fiberglass ...
High precision composite mould design, Composites Innovation Centre : design report
(2012-02-24)
The purpose of this project is to design a high precision composite panel moulding system to improve the manufacturing process currently used by Composites Innovation Centre. The current method uses two flat aluminum plates ...
AE2100 kitting cart design
(2012-06-11)
StandardAero’s AE2100 engine servicing facility is facing some issues in dealing with the handling of engine components. Engines are requiring greater levels of dismantling and the current carts used to store, track and ...
UMSAE Baja transmission design : final design report
(2012-06-11)
The University of Manitoba SAE (UMSAE) Baja team is a school group that designs, builds and races an off-road vehicle every year. The team has requested a re-design of their powertrain system, as they have had problems ...
Buhler Versatile cooling tower design for power take off testing dynamometer : final design report
(2012-02-24)
The purpose of this project was to design a closed loop cooling system for Buhler Versatile’s
new water break dynamometer. The following report outlines the steps taken to develop a
closed loop cooling system that will ...
Design project final report
(2012-02-24)
The objective of this project is to design a composite modular floor and wall panel system for
Composite Innovation Center (CIC) to be implemented in a temporary disaster relief structure. CIC
completed the design and ...