Show simple item record

dc.contributor.supervisor Labossiere, Paul (Mechanical and Manufacturing Engineering) en_US
dc.contributor.author Bolieau, Rheal
dc.contributor.author Wang, Weiran
dc.contributor.author Gray, Blayne R.
dc.contributor.author Zhou, Hanbin
dc.date.accessioned 2021-05-17T15:48:08Z
dc.date.available 2021-05-17T15:48:08Z
dc.date.issued 2016-12-07
dc.identifier.uri http://hdl.handle.net/1993/35551
dc.description.abstract Elmer’s Manufacturing currently has two shipping methods to transport the Super 7 harrow to its dealer network in Western Canada and North Dakota. The first method tows the harrow behind a truck and the second loads the harrow onto a flat deck trailer. Elmer’s increasing sales require the shipping of an increasing amount of harrows, leading to large shipping expenses. To lower the shipping expenses a method was developed that packages two 90’ Super 7 Harrows onto a single truckload. Before developing concepts the client’s major needs were identified, with the most important being cost and safety. In addition to the client needs the constraints were identified prior to the concept development phase. The major constraints identified were the size dimensions of the trailer and load as specified by the transportation regulation bodies in the individual regions. Size dimension constraints were determined to be 3.8 m for width, 4.7 m for height, 27.5 m for length, and 4 m for overhang. The final concept utilizes a B-Train trailer and packages the harrow wings on the rear trailer and the hitches on the forward trailer. The wings are secured by six metal brackets designed from stock steel material. The hitches are supported by wood stack brackets and the assemblies are secured to the trailer using tie-downs. The brackets have factors of safety well above the requirement and it was decided not to optimize the design because the reduction in cost was not equal to the decrease in safety of the design. The added load capacity of the brackets may be important during the dynamic loading seen during loading and transportation. In addition to the supporting brackets two pallets and two part boxes were included for all parts omitted from the initial assembly. A cost analysis of all three methods determined that the cheapest method for destinations outside of Manitoba was the proposed method, with the exact savings dependant on the destination. It was assumed the brackets would be reused and therefore analysis was performed assuming five reuses of each bracket. For example, approximate cost savings for shipping to Lloydminster is $1044.39... en_US
dc.description.sponsorship Elmer's Manufacturing en_US
dc.rights info:eu-repo/semantics/openAccess
dc.title Harrows Shipping Design Configuration en_US
dc.type Report en_US
dc.type info:eu-repo/semantics/report
dc.degree.discipline Mechanical Engineering en_US
dc.degree.level Bachelor of Science (B.Sc.) en_US


Files in this item

This item appears in the following Collection(s)

Show simple item record

View Statistics